Tüp Kartonlama Paketleme Makinası
1 、 PLC program kontrolü ve optoelektronik izleme, değişken frekans hız ayarı, metin görüntüleme vb. Makine otomatik olarak durdurabilir ve problemin zaman içerisinde çözülebilmesi için çalışma sürecinde problemin nedenlerini gösterebilir. 2 、 Makine kayış iletimi, zincir iletimi, dişli iletimi, kam iletimi, dört çubuk bağlantı mekanizması ve elektrik ve gaz kontrol mekanizmasını benimser. Farklı kameralar ve dişlilerle iletime göre, broşürü, ürün paketini, fazı hareket ettirin. karton ekleme, dil, karton contaya katlanır. 3 line Yeni ve büyük bir tek makine olarak üretim hattını üreten yeni bir ilaç üretim hattı modunu kurduk. Çok işlevli, kompakt yapı ve ince görünüm.
Introduction
HDS120 automatic cartoning packing machine has the function of putting the blister products or other products and leaflet into one box synchronously. The machine has the ability of folding leaflet, coding batch number, putting blister package or pillow package into box and stacking. It has high efficiency and good quality. The whole working process is controlled by PLC, photoelectric monitor, transducer, and wording display. If there is any problem during the working process, the machine can stop automatically and display reasons so that the problem can be solved in time.
This machine is mainly used for pharmaceutical, nutrition food, food and other industry, such as put the blister and soap into the box. It also can be linked with other machines and has a widely usage.
Requirement and parameter
(1)Requirement of leaflet
Selection of paper：52~62g/㎡（reference：GB/T451.2-1989 paper and board -Determination of grammage）offset paper（reference：GB/T1012-1991 offset paper）;
Size range：limit deviation of diagonal±1mm（reference：GB/T451.1-1989 paper and board -Determination of grammage）；
Max paper size 200×160mm（L×W）
Min paper size 160×100mm（L×W）
Limit deviation of paper thickness±2μm（reference：GB/T451.3-1989 paper and board -Determination of thickness）；
Direction of paper fiber and paper folding should keep vertical（reference：GB/452.1-1989 paper and board-Determination of horizontal and vertical）；
Storage condition of leaflet：（reference：GB/462-1989 paper and board storage and transportation）
Temperature 25℃±2℃；Relative humidity≤60%；
Make sure the paper neat, without edge and crimping
(2)Requirement of box
Selection of box：250~350g/㎡（reference：GB/T451.2-1989 paper and board -Determination of grammage）
White cardboard（Wood pulp board）（reference：GB/T3523-1999 White cardboard）；
Dimension：
Max box size：170×150×45㎜（L×W×H）
Min box size：75×45×15㎜（L×W×H）；
Limit deviation for the paper thickness±5μm（reference：GB/T451.3-1989 paper and board -Determination of thickness）；
Storage and preservation conditions for the box：
Temperature 25℃±2℃；Relative humidity≤60%；
Design the diagram according to the machine box needs, all the box are have lock(or sealing with glue), all the production process are machine-made, for example：laser cutting plate、machine cutting、machine punching、machine folding、box sticking、make sure the paper neat, without edge and crimping.
(3)Main parameter
Power：AC380 50Hz three-phase five-wire
Max power consumption：2.0kW（single match）
Folding speed：Max100page/min
Production capacity：Machine running speed：Max 90box/min
Air consumption：0.2-0.3m3/min(pressure 0.5~0.7MPa)
Machine size：1300×970×1600㎜（L×W×H）
Weight：About 900kg（machine）
Noise：Max 80dB
Working principle
Machine realize carton sucking, carton unfolding, leaflet sucking and folding, material transportation, carton packing, batch lot printing, carton sealing and other process automatically through series of accurate gear transmission, cam transmission and accurate roller chain transmission.
Machine maintenance principles
(1)Machine should keep clean, to often wipe, lubricate and turning components.
(2)Cam mechanism and transmission chain components should be lubricated every 15 to 40 working hours. #50 motor oil is suggested (kinematic viscosity is 47～53mm2/s 50℃). Gear meshing place should be lubricated every three months, calcium sulfonate grease is suggested, the model is ZG-1or ZG-2.
(3)Synchronous belt and transmission belt should avoid contact with oil，to avoid reduction of machine life usage.
(4)In order to keep the machine working reliable，it should be stopped once every three month. To check the tensioning of the transmission chain and the fastening level of each transmission component. And to re-adjust and fastening if it is necessary.
(5)After machine breakdown，there should be professional technician to pay attention to analyze and maintain. Disordered debugging and disassemble are serious forbidden in order to protect regular components.
